Call Today!
(404) 407-0071
Call Today!     (404) 407-0071
LG Dryer Repair 2018-11-13T00:50:36+00:00

LG Dryer Repair In Atlanta

LG Dryer Repair in Atlanta

When you need dependable, expert LG dryer repair in Atlanta and the Metro Atlanta area, call It Is Fixed.

Our LG repair specialists can quickly diagnose and fix any issue you may experience with your dryer, whether your dryer is leaving your clothes wet, or is making a strange noise, or has one of those difficult-to-diagnose on and off issues, our talented technicians can get the job done.

Book an Appointment

We believe that service begins with making sure the entire repair process is as quick and painless as possible.  That’s why we offer same-day service and a free diagnostic when you choose It Is Fixed as your repair provider. 

Take advantage of our online discount and book a service call today!

LG Dryer Fault Codes

Error Code Cause Solution
tE1 – Main Thermistor

tE2 – Main Thermistor

tE3 – Heater Thermistor

tE4 – Steam Generator

tE5 – Compressor Inlet Thermistor

tE6 – Compressor Outlet Thermistor

tE7 – Evaporator Inlet Thermistor

Thermistor Fault The thermistor in your dryer helps regulate how much heat your dryer puts out by monitoring the temperature inside the dryer compartment. When the heat increases, the resistance decreases. When your dryer reaches the necessary temperature, the control panel deactivates the heater. As the dryer cools, the thermistor resistance increases, signaling the control panel to reactivate the header.

If you see this error, you may have a problem with a dryer that is getting too hot, or your dryer may not dry your clothes..

To check the thermistor, unplug your dryer from the power.

Inspect the wiring between the thermistor and the control panel. Repair or replace any loose or damaged connections.

If you have a multimeter, a properly working thermistor should read at about 10,000 ohms.

A faulty thermistor must be replaced. Typically this is not an expensive part and repairs are quick.

Note: The Steam Generator Thermistor is built into the steam generator. If the thermistor is faulty, the entire unit must be replaced.

If the thermistor and connections are not the issues, additional diagnostics are necessary. The main control panel may need to be replaced.

Contact your local appliance repair provider for assistance.

EE Main Control Board Fault The main control board is the “computer” of the dryer. It manages all the other parts in the dryer.

  • The first step to resolve a control board error is to reboot the dryer.
    • Unplug the dryer from the power or turn off the power at the outlet using the circuit breaker.
    • Wait a full minute.
    • Plug the dryer back into the power.
  • If the error returns, the control board may need to be replaced.
  • Contact a certified repair technician for further assistance.
dE Door Switch Fault The door switch signals to the control panel that the dryer door is closed so the dryer can operate safely. If the door switch does not engage or send a signal, the dryer won’t turn on.

The first step is to verify that the problem is the switch. Unplug the dryer from the power.

Inspect the prong on the door that connects to the switch on the dryer body. If the prong is broken or damaged it must be replaced.

Check the door switch port for signs of damage, wear, or unexpected objects. Important: Never insert any object in the door switch port.

If there are no obvious signs of wear or breakage, the door switch must be disconnected from the dryer and tested with a multimeter.

PS Power Supply Issue You may see this error if there is a fluctuation in power, or if the electrical cord is not plugged securely into the wall outlet. To fix, unplug the dryer from the wall and leave it unplugged for two minutes. Reconnect the power. This should clear the error.
F0 Lint Filter is Missing The lint filter protects the dryer’s internal components from lint buildup. Without a lint filter, dry, heated fabric particles could catch on fire. As an added safety feature, some dryer models do not operate without the lint filter. If the lint filter is already in place, remove it and reinsert it into its receptacle.

Reqest Service

General Dryer Repair Guides

Recent Questions

GE Oven Door Won’t Unlock

May 17th, 2018|0 Comments

John B. Atlanta, GA I have a GE Model JT5000SF oven.  In the control panel, the word DOOR with an icon of a padlock is flashing and the oven light is on.  None of [...]

Can a Clogged Water Filter Cause My Ice Maker to Stop Working?

May 5th, 2018|0 Comments

Robert Paris Marietta, GA I have a new smart refrigerator. It's less than a year old, but the ice maker is not working. The ice maker is not clogged and the freezer [...]

What is The Cost to Replace the Compressor on a Sub-Zero Refrigerator?

April 25th, 2018|1 Comment

Kristen Cole Alpharetta, GA My new condo has a built-in Sub-Zero refrigerator, but it doesn’t get cold. The previous owner believed that all the unit needed was a new compressor. How much does [...]

Recent Posts

Moving? Take Care Not To Break These